CA M15A4 upgrading

Re: CA M15A4 upgrading

Postby Saber » Fri Apr 01, 2011 7:45 pm

Upgrading your ROF is as easy as bearing spring guide and piston head, and tossing in a 9.6 (assuming you've been running an 8.4) you don't actually need a Lipo. I gained significant ROF, when putting those in for efficiency and reduced stress on gears.

Edit: Almost forgot, if you're looking for a minor upgrade to FPS for cheap, a tightbore barrel is a good choice and easy to install.
In light of the recent shifts in policy my particular brand of humor and wit is no longer welcome here.
User avatar
Saber
Captain
Captain
 
Posts: 634
Joined: Sun Jul 18, 2010 8:55 am

Re: CA M15A4 upgrading

Postby Saber » Fri Apr 01, 2011 10:17 pm

Get with Kyle on it, he's got all those goodies. The 6.03 tightbore isn't too bad, been running bioshots through mine without any jams.
The spring guide and piston head are internal to the mechbox so you'd have to take that apart. The barrel you can do yourself with basic capabilities.
In light of the recent shifts in policy my particular brand of humor and wit is no longer welcome here.
User avatar
Saber
Captain
Captain
 
Posts: 634
Joined: Sun Jul 18, 2010 8:55 am

Re: CA M15A4 upgrading

Postby Baronvonsmooch » Fri Apr 01, 2011 11:07 pm

I hate to say this but if you are looking at seriously upgrading then buying the more expensive ammo comes along with it. Honestly in the long run it doesnt cost all that much and will shoot better than the cheap stuff.

The tightbore barrel is your first step in increasing the performance. The next one is more than likely to change out the spring to increase the FPS. To increase the ROF you just need to get a higher voltage battery. I run a large style 9.6v 4200 MaH in all of my Classic Army guns and I have never had a problem with ROF or FPS. If you are going for a high speed rig then that is a different story (my setup is geared toward higher torque more than higher ROF).
2012 Systema M4 CQBR MIL/LE
2008 Systema M4A1 Max
Daytona Gun SAW Para
CA M16A4 w/ M203
CA M4 CQB SEAL
STAR L85A2
A&K M60VN
Baronvonsmooch
Master Sergeant
Master Sergeant
 
Posts: 243
Joined: Mon Oct 25, 2010 1:01 pm

Re: CA M15A4 upgrading

Postby Baronvonsmooch » Sat Apr 02, 2011 1:38 am

Well best of luck on finding a guntech to work on your upgrades.
2012 Systema M4 CQBR MIL/LE
2008 Systema M4A1 Max
Daytona Gun SAW Para
CA M16A4 w/ M203
CA M4 CQB SEAL
STAR L85A2
A&K M60VN
Baronvonsmooch
Master Sergeant
Master Sergeant
 
Posts: 243
Joined: Mon Oct 25, 2010 1:01 pm

Re: CA M15A4 upgrading

Postby roehoe72 » Sat Apr 02, 2011 2:50 am

mydaynight wrote:my biggest problem is idk HOW to upgrade my gun...i now know what to get, but when i get them i won't know how to install them.

M120 spring for 400 fps. Tightbore plus good hopup and hopup bucking for better accuracy. 9.6 or 10.8 battery for rof. I can do all these upgrades for you. Pm me and we can talk $.
"If I were an alien, I'd want to visit Alaska too. Just like a tourist in a motor home." - Erin Jones
CASTNER'S CUTTHROATS
ALASKA'S FINEST
User avatar
roehoe72
Captain
Captain
 
Posts: 657
Joined: Wed Apr 22, 2009 4:50 pm

Re: CA M15A4 upgrading

Postby roehoe72 » Sat Apr 02, 2011 12:25 pm

Chances are it's 509mm. An m4 aeg bucking will work. Don't buy any "stock" bucking. Kyle has bucking by gaurder. I run one in my kwa, and it does the job.
"If I were an alien, I'd want to visit Alaska too. Just like a tourist in a motor home." - Erin Jones
CASTNER'S CUTTHROATS
ALASKA'S FINEST
User avatar
roehoe72
Captain
Captain
 
Posts: 657
Joined: Wed Apr 22, 2009 4:50 pm

Re: CA M15A4 upgrading

Postby Baronvonsmooch » Sat Apr 02, 2011 4:30 pm

Ive been using the Madbull Ultimate Hopup units with Madbull blue buckings. Before that I used Systema buckings with Madbull buckings.
2012 Systema M4 CQBR MIL/LE
2008 Systema M4A1 Max
Daytona Gun SAW Para
CA M16A4 w/ M203
CA M4 CQB SEAL
STAR L85A2
A&K M60VN
Baronvonsmooch
Master Sergeant
Master Sergeant
 
Posts: 243
Joined: Mon Oct 25, 2010 1:01 pm

Re: CA M15A4 upgrading

Postby roehoe72 » Sun Apr 03, 2011 7:06 pm

mydaynight wrote:what will a high torque motor do to my gun vs. a high speed motor?

Hi torque = fps hi speed= rof basically
"If I were an alien, I'd want to visit Alaska too. Just like a tourist in a motor home." - Erin Jones
CASTNER'S CUTTHROATS
ALASKA'S FINEST
User avatar
roehoe72
Captain
Captain
 
Posts: 657
Joined: Wed Apr 22, 2009 4:50 pm

Re: CA M15A4 upgrading

Postby AlienAlaska » Sun Apr 03, 2011 7:13 pm

high torque motors give you the ability to have a high rate of fire and still have high fps.
I fix/upgrade guns PM me
AlienAlaska
Master Sergeant
Master Sergeant
 
Posts: 316
Joined: Mon Apr 20, 2009 11:59 pm

Re: CA M15A4 upgrading

Postby AlienAlaska » Sun Apr 03, 2011 8:05 pm

ive done lots of upgrading/ repairing feel free to pm with questions or if you want to have some one work on one of your guns.
I fix/upgrade guns PM me
AlienAlaska
Master Sergeant
Master Sergeant
 
Posts: 316
Joined: Mon Apr 20, 2009 11:59 pm

Next

Return to Archives

Who is online

Users browsing this forum: No registered users and 1 guest

cron