WE 1911 MEU

Post photos and videos of your airsoft guns/gear

Re: WE 1911 MEU

Postby Cheese Man » Tue Feb 22, 2011 3:14 pm

Clyde, that was the original plan. I WAS going to make another front end, but this was just to test it a little.
I offer a range of airsmithing services, give them a try!
https://sites.google.com/site/cheesemanindustries/home

Up the Classics!
Cheese Man
First Lieutenant
First Lieutenant
 
Posts: 560
Joined: Tue Jun 01, 2010 9:54 am
Location: Anchorage, AK

Re: WE 1911 MEU

Postby Wellster » Tue Feb 22, 2011 5:29 pm

This concept could actually fly.To make this more practical,I would go with CO2,decrease the barrel diameter to 6mm,and cut the barrel length to 363mm.CO2 is more expansive than green gas or propane,and isnt as affected by the cold either.You could get an aeg suppresor to hide the barrel.I read an article on ASR where a guy built a KWA pistol to shoot over 500fps and a range of over 250 feet.

Article starts here:

http://forums.airsoftmechanics.com/inde ... pic=3607.0

And ends here:

http://www.airsoftretreat.com/forums/in ... ic=92276.0
CA G3SG-1,custom G3 cqb,ARES G36 ebb,LYT T65K2,Dboys PDW,Kart M14 EBR,
A&K SR-25 URX,JAC M16A2,Marushen Tec9,KWC Desert Eagle (400fps CO2 vs)KJW 1911A1
User avatar
Wellster
Corporal
Corporal
 
Posts: 89
Joined: Sat Sep 18, 2010 1:55 pm

Re: WE 1911 MEU

Postby Cheese Man » Tue Feb 22, 2011 5:33 pm

How do I convert a GG gun to CO2?
I offer a range of airsmithing services, give them a try!
https://sites.google.com/site/cheesemanindustries/home

Up the Classics!
Cheese Man
First Lieutenant
First Lieutenant
 
Posts: 560
Joined: Tue Jun 01, 2010 9:54 am
Location: Anchorage, AK

Re: WE 1911 MEU

Postby Wellster » Tue Feb 22, 2011 5:45 pm

In the article I linked to the gun in question is a KWA KP45 match running propane.From reading the article the mods done to the pistol were easy and pretty straight forward,mostly revolving around moding a PDI 6.01mm tight bre to fit in the KWA hopup.Im thinking they left some of it out,because that doesnt seem like enough to get it to shoot that hard.I would use an existing platform like a G&G extreme,KWC Desert Eagle,or a Winn gun myself.The rest would revolve around trying to squeeze as much gas as possible into the narrowest orifice I could to propel the bb forward as fast as possible.In this CO2 is the answer.
CA G3SG-1,custom G3 cqb,ARES G36 ebb,LYT T65K2,Dboys PDW,Kart M14 EBR,
A&K SR-25 URX,JAC M16A2,Marushen Tec9,KWC Desert Eagle (400fps CO2 vs)KJW 1911A1
User avatar
Wellster
Corporal
Corporal
 
Posts: 89
Joined: Sat Sep 18, 2010 1:55 pm

Previous

Return to Gun PRoN

Who is online

Users browsing this forum: No registered users and 2 guests

cron